How Does A Zebra Printer Print A Test Page?

- Feb 25, 2019 -

The zebra printer market is widely used, and the bar code printer print test page is a commonly used machine test method. Today, Hung Hing Wynn introduces you to the seven models of Zebra printers that print test pages:

1, Zebra105SL Zebra barcode printer: Shut down, press and hold the three button feed button, pause button and cancel button; boot, wait for the display to have content, release, bar code printer will automatically measure paper.

Restore factory settings: press "SETUP" twice, then press "+" "-" to turn the page, find "LOADDEFAULT", then press "SAVE", the barcode will automatically feed the paper, and restore the factory settings, restart the machine .

 

2, ZebraS600 zebra barcode printer: Shut down, press and hold PAUSE and FEED at the same time, about 3 seconds, press MODE4 four times, save the settings, then return to the print mode, then shut down to restore the factory settings.

Detection method: In the case of power on, press and hold the MODE button, then CALIBRATE (lighting indicator light) is on, then press the FEED button.

 

3, ZebraZ400 Zebra barcode printer: Shut down, press and hold the FEED+PAUSE button at the same time, release it after about 10 seconds, the printer will automatically restore the factory setting paper detection method: press and hold the CALIBRATE button to turn on the paper, release the CALIBRATE button after the paper is fed, this When a lot of paper is out, the paper is turned off after the paper is finished, and then turned on, and the paper is completed.


4. ZebraS4M: Barcode printer test bar code print head is working properly, whether there is broken needle phenomenon or detecting pressure balance on both sides of the print head: just print the test page to know, the method is to close the barcode printer first, then press and hold the PAUSE button Turn on the machine and wait for about 8 seconds to release. The barcode printer will automatically print out the paper and check if the printed content is intact. Restore factory settings: Shut down, press and hold the paper exit button, the pause button is turned on, and after about 8 seconds, the printer will be restored to the factory settings.

 

5, Zebra110XiIII: barcode printer paper recognition method: first press the pause button, then press CALIBRATE.

 

6, Zebra105SE: bar code printer paper: In the power-on state, press MODE three times, then press the FEED button, the printer automatically performs the paper measurement action.

 

7, ZebraZ4M: Zebra barcode printer paper: press and hold the pause button to start. Whether the zebra barcode print head is broken: press and hold the pause button to turn on the machine for 8 seconds, release the bar code printer to print a black block barcode label paper, check whether there is a white line on the sticker, if it can be judged as broken If the needle is pressed, it is very likely that the printed barcode will not be scanned.


Previous:Two-dimensional Code Level Barcode Detector Detection Method Next:21 Possible Reasons Why Barcode Scanners Can't Identify Barcodes